8 x 10″ thin steel (0.015″; 28 gauge) with ground coat and white on face side, ground coat only on back side. About 60% thinner than our Enameled Iron Tiles (18 gauge). Coat the back side with Scalex and fire flat on a wire mesh. Use standard contact adhesive to bond finished piece to plywood or other backing.
Example is a John Killmaster art piece that has a black granular spray on the surface of the tile (as sold), then dried and drawn with sgraffito technique.
GREAT FOR ENAMELING – THE BASE COATS ARE ALREADY DONE FOR YOU!
Also shapes can be cut with shears or use a pancake blanking die! Some chipping may occur, but enamel can be added to the chipped areas.
Some minor chipping may appear at the cut edges on the black side.
*** Please note that these are cut individually in our shop so some variation may occur.***