3 x 4″ Thin steel (0.015″; 28 gauge) with ground coat and white on face side, ground coat only on back side. About 60% thinner than our Enameled Iron Tiles (18 gauge). Coat the back side with Scalex and fire flat on a wire mesh. Use standard contact adhesive to bond finished piece to plywood or other backing.
*** Plastic sheet must be removed from white side before enameling ***
Example is a John Killmaster art piece that has a black granular spray on the surface of the tile (as sold), then dried and drawn with sgraffito technique.
GREAT FOR ENAMELING – THE BASE COATS ARE ALREADY DONE FOR YOU!
Also shapes can be cut with shears or use a pancake blanking die! Some chipping may occur, but enamel can be added to the chipped areas.
Some minor chipping may appear at the cut edges on the black side. Just add enamel and fire.
*** Please note that these are cut individually in our shop so some variation may occur.***
Be the first to review “3 x 4 THIN STEEL PLATE BLACK BOARD WHITE BOARD 28 gauge with ground coat and white on face side, ground coat only on back side”