12 x 12″ THIN STEEL PLATE BLACK BOARD WHITE BOARD 28 gauge with ground coat and white on face side, ground coat only on back side
$15.50
12 x 12″ Thin steel 0.015″; 28 gauge) with ground coat and white on face side, ground coat only on back side.
All pieces have a clear plastic sheet on the white side that must be peeled off before working with the enameled steel plate.
12 x 12″ thin steel (0.015″; 28 gauge) with ground coat and white on face side, ground coat only on back side. About 60% thinner than our Enameled Iron Tiles (18 gauge). Coat the back side with Scalex and fire flat on a wire mesh. Use standard contact adhesive to bond finished piece to plywood or other backing.
Example is a John Killmaster art piece that has a black granular spray on the surface of the tile (as sold), then dried and drawn with sgraffito technique.
GREAT FOR ENAMELING – THE BASE COATS ARE ALREADY DONE FOR YOU!
Also shapes can be cut with shears or use a pancake blanking die! Some chipping may occur, but enamel can be added to the chipped areas.
Some minor chipping may appear at the cut edges on the black side.
*** Please note that these are cut individually in our shop so some variation may occur.***
| Weight | 16.5 oz |
|---|---|
| Materials | 28 gauge, ground coat, steel, steel plate, white board, white coat |
Reviews
There are no reviews yet.
Related products
Be the first to review “12 x 12″ THIN STEEL PLATE BLACK BOARD WHITE BOARD 28 gauge with ground coat and white on face side, ground coat only on back side”